Bloom Coffee Table by Wood Design

Bloom Coffee Table by Wood Design - Alright, now what we're going to do is, we've touched up that little area with our paints, we've got the color background, the base color's in, and now I need to seal it. We're going to do that with an aerosol can because it carries well and you don't have the ability to spray in a home with all the equipment we have in the shops, so this is the next best thing. You just want to mist it on. We don't want a whole lot of finish on there. Just enough to protect it temporarily, for the time being. We're going to let that dry, and then we'll come back and we're going to add, build more to this finish. There's some other things we've got to do to get more depth in it, more color. For right now, we're about half way there, and you can see the divot's come a long way. We've gotten rid of the gouge, we've leveled it out, and now we've put some finish on there. And now we've got a sealer coat on and we're slowly working our way towards the finish. So, we'll let that dry and then we'll come back and do some more.

Modern wood block coffee table Our space-saving shelves provide handsome display space for your favorite frames, artwork, and decorative objects. Each shelf and ledge is secured to a wall using what is called a simple mount. Follow these steps to install your ledges and shelves properly. Your ledge or shelf will come with a wall mounting bracket with bubble level channel and bubble level, and a fixed mounting bracket, stud-mounting screws, toggle anchors for drywall only, and toggle screws for drywall only. You will need the following tools. Stud finder, number 2 Philips screwdriver, or drill with Philips drill bit, pencil, measuring tape. Determine the desired placement on the wall, and us the pencil and use the pencil to mark roughly where the top of the shelf or ledge will fall. Within this desired mounting location, locate the wall studs using the stud finder, and mark the location of each stud with a pencil. You will use at least one of these studs later. Insert the small bubble level into the level holding channel of the wall mount bracket and orient the bracket so that the line of holes are positioned above the level holding channel.

Position the wall mount bracket against the wall, and adjust the bracket side to side until one of the mini holes aligns with the stud marks. One or two studs may overlap with the bracket, depending on the length of the product Once aligned with studs, use the bubble level to make sure that the bracket is level on the wall, and then use a pen or pencil to mark the one or two holes that align with studs, the bracket itself next to the stud-aligned holes above, cambridge brown wood modern coffee table with hidden storage and the wall through the holes located at each end of the bracket, for the toggles. Set the bracket aside, install the toggles into the wall, at the toggle marks previously made using a screwdriver. Continue rotating until the large flange becomes even with the surface of the wall. Do not over tighten. Return the bracket to the wall, aligning the end holes with the installed toggles. Insert a toggle screw into each toggle, and tighten until it becomes tight. Us the screwdriver or drill to install a stud-mounting screw directly into the wall, through the one or two bracket holes that align with studs, until tight. The wall-mounted bracket is now mounted to the wall. Lift the ledge or shelf against the wall, so that the mounting bracket attached to it is located above the wall-mounted bracket. Lower the ledge or shelf down so that the two brackets engage each other. Firmly tap the shelf or ledge along the wall, to tighten the bracket engagement. Your ledge or shelf is now ready to use.